Wood 1004 Wood Working: Veneer Patching

As we wind down the woodworking section, we have looked at power tools and hand tools, we have learned how to square a board, we have done riping and cross-cutting on the table saw, made tenons on the router table, used the scroll saw to duplicate a back splat for a chair, we've hand cut tenons, made usable cutting boards and now we are looking at veneer patching.

There are a number of ways to patch veneer, in Spot Repair I, we learned how to do burn-in's, in Spot Repair II we learned that we could do a polyester fill, now we look at replacing wood with wood. This gives us our grain and texture back, if the piece should ever be stripped, there will be wood there, and it gives us another tool we can use to solve problems. Even within the veneer patch, there are a few different techniques, you could cut a uniform shape into the veneer and replace the missing piece with a new piece of veneer, scarfing the joint to feather in the new wood. If you have the piece of veneer that came off you can re-glue it. You can also cut your new veneer with a jewelers saw and fit it into the existing gap, while not loosing any original wood or finish. Once you have put all the new pieces in, it is a matter of an accurate color match and top coat and you can have a very nice repair on any veneered surface.

Wood 1019 Spot Repair II: NIWF Does Conservation Work at Historic Fort Snelling Chapel

On our 1st of many field trips, the students got to roll up their sleeves and put to good use the knowledge they have already acquired. The Fort Snelling Veterans Memorial Chapel, built in 1927. Fort Snelling was deactivated as a military post in 1947, leaving the chapel sitting unused until it narrowly escaped a scheduled demolition for the highway system in the mid 60's. It is alive and well today serving many facets of the state's population through such programs as: weekend open houses for tourists to the historic Fort Snelling; rehearsals and weddings of all faith groups; funerals of all denominations; general community meetings; and weekly Sunday non-denominational services.



Our goals were to clean and conserve the pews, kneelers and surrounding wood. Each student dug in with a few pews each, using mild cleaning solution, replacing worn finish where needed, spot repair as needed, and finally padding shellac to give an authentic, original look, feel and lustre to that well worn interior.


We were guided by past NIWF grad, Travis Beard, who volunteers on the Fort Snelling Memorial Chapel Foundation, and has been working in the chapel for a while, cleaning and restoring the woodwork, carvings and wooden statues.

Wood 1032 Furniture Conservation: Past Grad Seth Stevenson talks antiques

Past NIWF graduate, and professional antique dealer, Seth Stevenson, came in today to talk about his business in dealing, refinishing, refurbishing and conservation of antiques. Seth was dealing in antiques before he came to DCTC, but decided to take his knowledge, skills, and abilities to the next level by attending the National Institute of Wood Finishing.
Seth is a walking encyclopedia of American Furniture, and it shows when he talks to the class. It has been a lifelong study for him and his expertise pays off.
Seth came in as part of our Furniture Conservation section, because that is such an integral part of the antique business, who better than Seth to talk about it.

Wood 1032 Furniture Conservation: Cleaning & Conserving

Sometimes furniture comes in that doesn't need, or shouldn't be refinished, sometimes preserving the original finish is the way to go. In fact, there can be some wonderful surprises in store when preserving a finish. This chair came in and the goal was to clean the years of grime and build up that had accumulated.

After determining what the finish was, the right solvents and cleansers were chosen, and the chair was meticulously cleaned.

After a bit of careful, skilled work

we discovered beautiful, ornate painting that was previously covered with years of dirt and oil.
Learning to make these decisions of refinish vs. refurbish is something that sets NIWF grads well on their way to a successful career in wood finishing technology.

Wood 1015 Spot Repair I: David Wendell Larson visits NIWF for a spot repair demo

Master spot repair artist David Wendell Larson came to visit and show his more than 45 years of spot repair expertise! David has been self employed since 1957, and has been operating his business in the Twin Cities since 1966, not to mention that he was the furniture conservator for the Groves Collection from 1976 to 1984 and for the Norwest Corporation of Arts Program from 1988 to 1998. He was a Member of the George Frank Study Tour to China in 1987 and to Paris & London in 1994. He is a contributor to Professional Refinishing magazine, and we are pleased to have him on our Advisory board as well. David is always a welcome addition to our classroom, we thank him for his visit, and look forward to next time!

Wood 1004 Wood Working: Being Creative

Sometimes when we are making components for our furniture, we need to be creative. Here we needed a bead for a chair, instead of using the lathe for this small piece, we decided to do the work on the drill press.
Getting the detail of the bead was crucial to achieve the right look, we were at a loss for the exact right tool, so we made our own from a piece of tool steel. The drill press spun the bead, it was anchored below by a dowel, then the scraper was fed into the piece, while being stabilized by the block of wood behind it.
It is just this kind on craftsmanship that is needed when taking on antiques, as each piece was usually hand made and unique.

Wood 1032 Furniture Conservation: NIWF and the Minnesota Institute of Arts National Antique Show

The Minneapolis Institute of Arts was conducting their 25th Annual National Antique Show October 23rd through October 26th. This show has some of the finest furniture, art work, jewelry, paintings and glassware that you can find.

The DCTC students have portered in these valuable artifacts for every one of those 25 shows. It has been very rewarding being a part of this show and the opportunity to handle millions of dollars worth of art. The dealers involved with this show have always been willing to share their knowledge with the students.

Andrew Wellesley (red shirt) from Lake Forrest Illinois always has some really wonderful furniture. Andrew is always willing to stop and answer questions about the history of the pieces he sells. The chest on chest has a date written inside the cabinet with the makers name and the date of 1795